API 610 Series Bb4 Multistage High-Temperature High-Pressure Centrifugal Pump for Oil and Gas Chemical Industry

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: BB4
• Max.Head: >150m
• Max.Capacity: >400 L/min
• Driving Type: Electric
• Material: as Customer Need
• Structure: Multistage Pump
• Assembly: Liquid Pumps
• Power: Electric
• Start Up: Electric Pump
• Type: Multistage Pump
• Application: Clarified Water Pump
• Industry: Hot Water Pump
• Media: Hot Water
• Performance: Wear Pump
• Theory: Centrifugal Pump
• Medium T: Less Than 400c
• Capacity: 32~620m3/H
• Head: 550-4500m
• Feature: ISO2858-1975
• MOQ: 1 Set
• Delivery Time: According to Your Quality
• Original: China Pump
• Pump Features: Double Ends Mechanical Seal
• Use in: Wastewater Treatment Systems
• Other Details: Pls Check in Follow Data
• Transport Package: Export Wooden Case
• Specification: As details
• Trademark: Tailide
• Origin: Shenyang, China
• HS Code: 8413810090
• Production Capacity: 50000 Set/ Year

Product Description

Multistage Water Pump

BB4

BB5

BB4 is a centrifugal pump of horizontal, single suction, multistage and sectional structure. It owns the features of high efficiency, wide performance
range, smooth operation, low noise, easy maintenance...Was designed to pump clean water or fluids have close characters of water. Also, by
changing pump wetted parts, it is able to pump fluids like hot water, oil, corrosive fluids and fluids particles. 

Parameters Range: 

1. Flow rate: Q=20~540m3/h
2. Total head: H=16~1500m
3. Speed: N=1450rpm/2950rpm
4. S. G.: Γ ≤1.15
5. Medium Temperature: T≤210ºC
6. Pump diameter: 80, 100, 125, 150, 200, 250mm

Application: 

BB4 Feed Water Pump is multi-stage sectional centrifugal pump for medium pressure boiler water supply, also can be used for conveying similar liquid medium; 

Structure: 

1. The pump set mainly consists of bearing housing, inlet and out section, middle section, guide vanes. 
2. The pump inlet is horizontal and outlet is vertical; The balance hose on the inlet is connected back to the water inlet side. 
3. Between bearings structure. The rotary part consists of shaft, impellers and a balance disk. 
4. The gaps between pump inlet section, middle section and outlet section are smeared by molybdenum disulfide compound calcium-based lubricating grease as the sealings. The gaps of rotary part and static part are sealed seal rings, guide vane sleeve and packing. 
5. Standard shaft sealing is packing, can be customized as mechanical seal. 

Main parts: 
1. Suction stage 2. Diffuser 3. Middle stage 4. Discharge stage 5. First stage impeller 6. Impeller 7. Balancing Disc
8. Balance plate 9. Cover 10. Packing 11. Balance sleeve 12. Packing gland 13. Oring 14. Bearing
15. First stage sealing ring 16. Seal ring 17. Diffuser sleeve 18. Shaft 19. Shaft sleeve

Parts feature :

Mech Seal: 
Packing seal or Mechanical seal, if need cooling water. Seal plan: P11, P23, P32, P11+61, P11+53A, P11+53B. 
Mech seal factory is colossus.John crane..

Oil station: 
If need use oil station, selected according to your technical parameter ..brand is china.

Bearing and balancing device: 
All brand bearing. Pump rotor pump shaft at both ends of the Rolling bearing support, dilute oil lubrication, water cooling. The axial thrust of the rotor is balanced
By the balance disc, and the equilibrium return water is returned to the suction section of the pump. 

Transmission: 
Feed Water Pump through the elastic coupling (or diaphragm coupling) and drive (motor, turbine, diesel engine etc. ) connected, Clockwise rotation from
The drive end to the pump. 

Motor: 
China brand motor...ABB. Simens, Weg Or others brand..


GA Drawing sample (BB4-850-55*8)

Material: 
We will select material according to your technical sheet ( S-5,S-6,C-6,A-8...)


More Products picture: 



WHY CHOSE FOR US? 

1.   According customer technical parameter, we will select suitable model , provide all technical document : GA drawing , C.S drawing .
curve . data sheet .2 years spare parts list .
2.   OEM services according to clients' engineering drawings, samples. Products can be marked and labelled with clients' nameplates,
part numbers and other labels.
3.   After-sales services provided, including pump installation, operation and maintenance instructions, centrifugal pumps repair and replacement.
4. We can provide ISO9001 ,ISO14001,BV ,CE certificate ...
5. Pump pass through TUV testing .
5. 18 MONTHS Warranty 

Certificate we have 


For more details (BB4), pls contact with us! 
If need Double casing BB5 pump more details